DS600PD-9 pile driver is widely used in high speed railway, highway soft foundation compaction treatment, construction engineering, real estate, municipal pipeline, bridge, rail transit, tunnel deep foundation pit support, trench, cofferdam, breakwater seepage reinforcement, suitable for all kinds of steel sheet pile, steel pipe pile, concrete precast pile, photovoltaic pile and so on.
Main specifications
Engine | Manufacturer model number | Cummins QSM11 |
Rated power | 298KW(405HP)/1800rpm | |
Number of cylinders | 6 | |
Emission standard | Kunisan | |
Type | Supercharging, electric injection, water cooling | |
Main pump | Type | Variable axial piston pump |
Maximum discharge | 2×385L/min | |
Quantity | 2 | |
Pilot pump | Type | Gear pump |
Maximum discharge | 30L/min | |
Oil cylinder | Big arm | 200×140×1,615mm |
Forearm | 190×130××1,980mm | |
Bucket | 180×130×910mm | |
Speed | Turning speed | 8.3rpm |
Travel speed | 5.3/3.1 km/h | |
Tank capacity | Fuel tank | 685L |
Hydraulic tank | 390L |
Main dimensions
Transport height (to top of boom) | mm | 3,300 |
Transport height (to hose top) | mm | 3,340 |
Transport length | mm | 16,800 |
Transport width | mm | 3,620 |
Tail radius | mm | 4,410 |
Counterweight ground clearance | mm | 1,460 |
Total height (to cab top) | mm | 3,350 |
Turntable width | mm | 3,296 |
Cab height (above turntable) | mm | 845 |
Cab full width | mm | 1,010 |
Distance between guide wheel and drive wheel center | mm | 4,475 |
Track length | mm | 5,455 |
Overall width | mm | 3,620/3900* |
Track width | mm | 800 |
Maximum pile height | mm | 20,800 |
Maximum sandwiching distance | mm | 20,210 |
Note: * Chassis contraction/chassis expansion
Technical parameter
Item | Unit | Piling arm length | ||
16.5M | 18M | 18.8M | ||
Arm length | mm | 11,000 | 12,000 | 12,800 |
Forearm length | mm | 5,500 | 6,000 | 6,000 |
Auxiliary arm length | mm | 2,300 | 2,300 | 2,300 |
Maximum mass height | mm | 17,000 | 19,600 | 21,000 |
Pile hammer model | 350 | 450 | 450 | |
Hydraulic motor type | #107/110 | #107/110 | #107/110 | |
Rotational speed | r/m | 2,500 | 2,500 | 2,500 |
Vibratory force | Tcn | 41 | 51 | 51 |
Hydraulic motor input oil quantity | L/m | 270 | 270 | 270 |
Weight of the pile hammer | Kg | 2,900 | 3,050 | 3,050 |
